Däcksförskruvning Waste

Tekniska frågor om tex. motorer , el etc.
Technical matters about engines, electrical equipment etc.

Moderator: Lars Lundbladh

Skriv svar
Sejler
Inlägg: 21
Blev medlem: 28 apr 2022, 11:37

Däcksförskruvning Waste

Inlägg av Sejler »

I have custom made wastetank in stainless steel. It can only be emptied into the water. Its located under the midcabin in a Fjord 24.

I would like to be able to empty it via a suction pump on land. I was thinking about installing this one in the tank:
https://www.watski.se/Septiktanktmning- ... tnr=105599

Any feedback or advice would be appreciated.

Thanks.
Makro
Inlägg: 292
Blev medlem: 22 jul 2018, 23:16
Ort: Hönö

Re: Däcksförskruvning Waste

Inlägg av Makro »

Yes, that is the right one.
If you have a sea cock in the hull för the waste outlet you only need to add a T-coupling on the hose to the deck fitting. Keep it simple.
Don't forget to check the air vent to the tank, a 19mm is recommended for pump out station, a 13mm will not bring enough air into the tank.
Buy a high quality hose to prevent odour and don't go for the cheap ones, you will not regret it after a few years :wink:
Bilagor
Holding tank.jpg
Fjord 900 Dolphin -87 2xAD31
Vår båttråd: viewtopic.php?f=5&t=1674
Skriv svar